不锈钢雕塑和玻璃刚雕塑的保养方法：
Maintenance methods of stainless steel sculpture and glass sculpture:
1.不锈钢雕塑
1. Stainless steel sculpture
定期清洁：在一定的时间段内进行清洗，记住要用无绒毛巾加中性清洁剂进行清洗。
Regular cleaning: in a certain period of time for cleaning, remember to use lint free towel plus neutral detergent for cleaning.
细缝清洁：要棉花球沾水进行擦拭，不要用湿毛巾进行擦拭。
Fine seam cleaning: wipe cotton ball with water instead of wet towel.
干燥通风的环境：有些雕塑要放在不通风的环境里，而不锈钢雕塑要放在干燥且通风的环境里来进行保护。
Dry and airy environment: some sculptures should be placed in an airless environment, while stainless steel sculptures should be placed in a dry and airy environment for protection.
上蜡保护：在不锈钢雕塑清洗完成后，要上蜡，这基本是一年一次
Waxing protection: after stainless steel sculpture cleaning, waxing is required, which is basically once a year
2.玻璃钢雕塑：
2. FRP sculpture:
环境的清洁：在制作（施工）现场要每日清洗，工具、摆放的物件，防止空气中的尘土及其他物质落到液态树脂上，影响玻璃钢雕塑的质量。
Environmental cleaning: clean the tools and placed objects on the production (construction) site every day to prevent dust and other substances in the air from falling on the liquid resin and affecting the quality of FRP sculpture.
工具的清洁：使用后的工具应有专人清洗，这样既利于操作还不会因工具上的树脂结块、颗粒等影响玻璃钢雕塑的质量。
Cleaning of tools: the tools after use shall be cleaned by specially assigned personnel, which is not only conducive to operation, but also will not affect the quality of FRP sculpture due to resin caking and particles on the tools.
模具的清洁：模具在使用前必须要进行清洁，用清水和洗洁精反复冲洗，要想使玻璃钢雕塑达到镜面效果模具上的灰尘、油渍等都应去除。
Mold cleaning: the mold must be cleaned before use, and washed repeatedly with clean water and detergent. In order to make the glass fiber reinforced plastic sculpture achieve the mirror effect, the dust and oil stains on the mold should be removed.