保定铜雕生产厂

首先：设计人物雕塑造型 首先就是对于雕塑的整体的构想而设计出图纸，然后再依照此图案的样子铸造出此人物铸铜雕塑。

First of all, the design of figure sculpture is the first to design drawings for the overall conception of sculpture, and then to cast the bronze statue of this character according to the appearance of this pattern.

第二步：制作泥稿 然后就是对设计出来的图案用泥稿做出个大致的模型出来，方便我们定型，

The second step: making the mud manuscript and then making a rough model of the designed pattern with the mud manuscript, which is convenient for us to shape the pattern.

第三步：模具翻制 模具有两种：一种要是不太复杂的就用石膏翻制。另一种是复杂的就用硅胶翻制。

The third step: there are two kinds of mould turning moulds: one if it is not too complicated to use plaster. The other is a complex one that is made of silica gel.

第四步：蜡型灌制 把融化好的石蜡灌到已经制作好的石膏模具或硅胶模具里，等石蜡冷却后就成了蜡型了。

The fourth step: make good wax melted paraffin and pour into the prepared plaster mold or silicone mold, such as paraffin wax after a cooling type.

第五步：制壳 制壳和模具翻制一样分为两种：一种是小件或着复杂的我们应该选用精密铸造，另一种就是树脂砂箱制作，

Fifth step: shell making and shell making are divided into two parts: one is small or complex, we should use precision casting and the other is resin sand box.

第六步：铸造 高温把铜化成铜水灌注到做好的壳或砂箱里面。

The sixth step: the copper to copper casting high temperature water is poured into the shell or sand box to do.

第七步：打磨 清冒口打磨。

The seventh step: grinding and polishing the riser.

第八步：拼接铸铜雕塑 把已经打磨好的铜雕拼在一起，成为一个完整的整体。

The eighth step: mosaic bronze sculpture polished bronze has been put together as a complete whole.

第九步：清理焊口 把我们拼接好的铜雕焊接的部位都处理成跟我们的泥稿一摸一样.

The ninth step: clean up our good weld splice welded parts are processed into bronze like our mud draft touched.

第十步：上油、封蜡 上油、封蜡可以让我们的铸铜雕塑长久保持。

The tenth step: oil, wax oil, wax can let us keep the copper sculpture.